Evolution Racewerks 2012+ BMW N55 335i 435i M135i M235i F2x/F3x Turbo Sport Series Catted Downpipe

$995.00

PRODUCT DESCRIPTION

Restrictions in the exhaust system robs horsepower and torque especially on turbocharged cars.  Thus, removing as much exhaust flow restrictions will increase horsepower and torque significantly.  The factory catalytic converter found in the factory downpipe is a big culprit of this and is a major exhaust flow restriction. The factory catalytic converter is made up of catalyst material formed into "honeycomb" weaves. Exhaust gas must pass through these tiny "honeycomb" weaves on their way to the exhaust system thus causing a major exhaust flow restriction. It also causes turbulence after the catalytic converter which causes the exhaust flow to slow down (which increases restriction). By replacing the factory downpipe/catalytic converter with our Sports Series 4" High Flow Catted Downpipe, more power is unleashed! The factory catalyter uses a 400 cell ceramic core. What the 400 cells means is that per every inch, there are 400 "cells" that the exhaust gas must pass through. We use a 200 cell metallic core. By having less cells per square inch, these individual "cells" are bigger in size thus allowing exhaust gas to pass through it more easily. Thus, the lower the cell count, the higher the flow. Higher flow = more power, faster turbo spool up (less turbocharger lag) and better throttle response. Bottom line, faster. The benefits of a metallic catalytic converter vs a ceramic like the factory is that it can take more heat and is more durable (last longer). They are also lighter than their ceramic counterparts. Additional O2 Sensor Bung -  An additional O2 sensor bung can be added so that you can easily add a wideband o2 sensor and gauges so that you can monitor air/fuel ratios.  The additional O2 sensor bung will come pre-installed with a plug so that you do not need to run the o2 sensor right away. Optional EGT (Exhaust Gas Temperature) Bung - An additional 1/8" NPT bung can be added so that you can easily add a EGT sensor and gauge.  The optional EGT sensor bung will come pre-installed with a plug so that you do not need to run the EGT sensor right away. Notice of Fault Codes/Check Engine Light - Using any Racing downpipe could result in a check engine light and fault codes, even with sport cats. Although we have heard of cases where no check engine light appeared, these Racing downpipes are not designed to meet emissions testing and regulations. Race software that is specific to your mods is strongly advised to better adapt your car to a racing environment, keep the fault codes from appearing, optimize power gains, and improve general drivability. Notice of Emissions Non-Compliance. This product is intended only for racing vehicles that may never be used, or registered or licensed for use, upon a public highway. Removing, disabling, or altering emissions equipment on a pollution-controlled road vehicle is illegal. Installing devices or software that trick, disable, or modify emissions controls and monitors on a pollution-controlled road vehicle is also illegal. This product is sold only for racing, competition, track, hobby, or other off-road use. It's use is prohibited in any motor vehicle that is subject to emissions inspection or control. It is not legal for installation or use on any pollution controlled motor vehicle in any state, province, or jurisdiction governed by, or which has adopted, CARB or EPA regulations. Monaco Motorsports may confirm a customer's racing license, entry, or track participation and reserves the right to cancel part(s) that are not for legitimate racing or track purposes. Some suppliers have shipping exceptions to certain states or territories, requiring extra delivery time. We will advise you of any delays.

  • High Flow 200 cell metallic catalytic converter
  • Higher Max Horsepower Power Curve
  • Higher Intial Torque Curve.  Torque curve hits faster, higher, and longer
  • Better throttle response and faster turbo spool up times
  • Mandrel Bent 4″ piping.  Smooth transition to the exhaust system
  • 100% Stainless Steel Construction
  • 100% TIG welded for better quality welds
  • Precision CNC machined turbocharger V-Band flange
  • Brush Finish (standard) or optional Polish Finish
  • Available with high temperature Black Thermal Coating to reduce underhood temperatures
  • Optional – Additional O2 sensor bung for wideband O2 sensors (comes with pre-installed plug)
  • Optional EGT sensor bung for EGT gauges (comes with pre-installed plug)
  • Compatible with the factory or aftermarket exhaust systems
  • Track tested durability
  • Includes all hardware for complete installation
  • Limited Lifetime Warranty
  • Made in the USA!
  • 2012+ BMW 335i (F30 Chassis) N55 Engines
  • 2013+ BMW 435i (F32/F33/F34 Chassis) N55 Engines
  • 2012+ BMW M135i (F20/F21 Chassis) N55 Engine
  • 2012+ BMW M235i (F22 Chassis) N55 Engine
  • The F Series (1,2,3,4 Series) N55 cars all share the same downpipe.  When first introduced, the downpipes had a 3.5″ v-band flange intlet on the turbocharger side.  On 07/13, BMW decided to change the downpipe.  This new downpipe featured a 4″ v-band flange inlet instead.  Thus, the previous downpipes are not compatible with the new ones. See Below:
  • 335i (U.S. Spec) – Up to 07/13 have the old downpipe (BM-EXH007)

    After 07/13 have the new downpipe (BM-EXH012)

  • 435i (U.S. Spec) – All 435i have the new downpipe (BM-EXH012)
  • M235i (U.S. Spec) – All M235i have the new downpipe (BM-EXH012)
  • M135i (European Spec) – Up to 07/13 have the old downpipe (BM-EXH007)

    After 07/13 have the new downpipe (BM-EXH-012)